Home > Knowledge > Content
What do you need to press the oca laminating machine?
Oct 24, 2018

With the emergence of a variety of touch screen electronic products, the rapid development of mobile smart touch screens, more and more businesses began to seize these business opportunities: mobile phone screen repair industry, the mobile phone screen is getting bigger today, the explosion The probability of the screen is getting bigger and bigger. At this time, it is too expensive to buy a mobile phone. It is the best choice now to change the screen. The most important thing in the whole repair process is the fitting process. To use OCA pressure screen machine, vacuum laminating machine is widely used in the attaching process of capacitive touch screen CG and ITO. Many people don't know much about the screen bonding technology of OCA press screen. The following is the technology of JOSION. Personnel to share the screen bonding technology of OCA press screen:

The assembly of the full-fit module and the whole machine can be directly fixed by means of snapping or locking screws, thereby reducing the assembly problem caused by the fitting deviation, and simplifying the assembly process and reducing the assembly cost. The full-fit module does not need to consider anti-dust and water vapor, so the CTP LENS frame does not need to consider the fit width, and can achieve a narrower frame. At the same time, because it does not need to consider the double-sided adhesive strength, it also contributes to the narrow frame design, and the frame can be made narrower.

The air layer of the ordinary fitting method is easily polluted by the environment dust and water vapor, which affects the use of the machine; the fully-fitted OCA glue fills the gap, the display panel is closely fitted with the touch screen, the dust and the water vapor have nowhere to go, and the screen is maintained. Cleanliness.

The full-fit screen has a thinner body. The touch screen and the display screen are glued with optical glue, which only increases the thickness of 25μm-50μm; it is thinner than the normal fitting method by 0.1mm-0.7mm. The thinner module thickness is the whole structure. The design provides greater flexibility, and the thinner body improves product quality and demonstrates technical content.