Home > Knowledge > Content
Is the most popular laser screen splitter really good at the moment?
Nov 16, 2018

Those familiar with the mobile phone screen repair industry know that the box in the screen has always been the pain of the people in the industry forever. From the earliest Samsung S3, it was soaked with white oil, heated and separated, and the cryo-freezer was separated by more than 100 degrees. , and then the laser separation. Everyone can be described as "the Eight Immortals crossing the sea, all the magical powers", the tools of separation are also varied, cheap white oil with a few dollars, expensive more than 10,000 low-temperature screen refrigerators and laser screen splitters What kind of frame-breaking method is more suitable for everyone? Xiao Bian believes that this issue is benevolent, and the wise sees wisdom. There are no standard answers and no best way. Only the method that works best for you. The company where Xiaobian is located is also trying various methods. Recently, a portable laser screen-removal machine was launched in response to customer needs. After these days of testing, many domestic and iphone screens were also removed. After summarizing, some experience gained from the experience is shared with the maintenance peers.

     

image

      

        First of all, the machine we used to remove the middle frame of the screen must purchase the laser of the fiber laser. The power is 20W. The price is too expensive, too small. Whether it is portable or desktop, we can connect the hardware and install the software. The software installation includes the machine's operating system and drawing system. The operating system manufacturer of the machine will provide you with installation instructions and the interface is simple and clear. Xiaobian wants to say is the drawing system, drawing system we generally use coreiDRAW software, this software believes that people who have a certain understanding of graphic design is no stranger, use this software to draw the screen graphics we need to disassemble, Shade the places we need to dismantle, especially pay attention to the screen cable and LCD glass. If you don't avoid it, the laser will penetrate the glass and the LCD glass and cable. Save the graphics and save it. For plt format and dxf format, pour into the operating system.


      

      The operation of the laser screen splitter is actually quite simple. It is similar to the way we use the printers. It will install the software and the computer can be used. The difficulty lies in the drawing software. If you don't use the coreiDRAW software to draw, Xiaobian reminds everyone that the later stage must be Manufacturers are required to provide drawings of mainstream mobile phones on the market, otherwise it will be more troublesome later.


  

image

 

image

      What are the screen models that can be removed by the laser screen splitter? What is the effect? I believe this is also the issue that everyone is most concerned about. The use of a laser splitter to remove the domestic mobile phone screen and the iphone 8 iphone X and other screens does have many advantages. First, the safety factor is very high. The laser split screen principle uses a laser to penetrate the screen glass cover to the middle frame or the glass back cover. The glue on the melt will not cause physical damage to the screen. In addition, the speed is also relatively fast, generally a screen laser time is about 30 seconds, more suitable for large-scale screen splitters. Now the mainstream machines on the market can be removed, OPPO VIVO Apple and Huawei, etc. The disadvantage is that the glass cover can not be removed, because the glass cover window is under the LCD screen, if you directly hit the window part will hurt the LCD glass, therefore, If you want to remove the glass cover, you need to use a heating separator or a low temperature screen refrigerator. Finally, the laser screen splitter is used to disassemble the screen, and the screen frame, bracket, and glass back cover can be removed, and the screen glass cannot be removed. If you are interested in laser screen splitter or want to know, you can contact me.